Credit cards accepted




Master Plumbers Association of NSW Member

Able Hot Water, Sydney
Rinnai Solar Panel


 

TIP: Click on system number to view dimensions.



Rinnai  BEASLEY - SPLIT SYSTEM
Rinnai - Split System With split systems only the solar collector panels sit on the roof and the storage tank is located at ground level. The main benefit of this system is that the tank is installed remotely from the panels in the most convenient location - usually on the "blind side" of the house. A small pump circulates the water from the tank through the panels to collect the heat energy from the sun. This pump is automatically regulated by a controller that monitors the temperature in both the tank and collector panels and optimises solar gain.
Benefits:
  • Easy installation on roofs.
  • Streamlined appearance - minimal impact on the aesthetics of your roof line.
  • Split systems do not require reinforcement on the roof structure, as the weight associated. with water storage is at ground level.
  • Collector panels and the tank do not need to be installed at the same time - ideal during construction of new homes and major renovations.
  • Tall solar tank provides better heat stratification, improving efficiency.
  • Simpler service access (ground level).

Click here for specifications.

Back to top






Rinnai  BEASLEY - CLOSE-COUPLED SYSTEM
Rinnai - Close-coupled System With close coupled systems, the solar collector panels and the storage tank are both located on the roof. The advantage of this system is the ability to free up space around the base of the house. In the close-coupled installation, the solar tank is mounted above the collectors on the roof, and the water heated in the panels rises by the natural thermosiphon principle through the collectors into the tank, and is recirculated through the panels until the water reaches the required temperature.
Benefits:
  • Technically very efficient, economical to install and low maintenance.
  • No recirculating pumps and pipe runs - reducing heat losses and improving running efficiencies.
  • No electricity required to operate pumps to recirculate the water through the panels.
  • Eliminates the need for a storage tank at ground level - ideal for courtyard homes or small blocks.
  • Wide range of Colorbond® colours available. Ask your Rinnai Solar consultant for selection.
  • Gas booster can be recessed in a wall cavity saving precious space.

Click here for specifications.

Back to top






Rinnai  SUNMASTER - SPLIT SYSTEM
Sunmaster - Split System A solar split system is where only the solar collector panels sit on the roof and the storage tank is located at ground level. A small pump circulates the water from the tank through the panels to collect the heat energy from the sun.
Benefits:
  • Streamlined Appearance. Minimal impact on the aesthetics of the roof line, and the tank is ussually placed on the 'blind' side of the house.
  • Separate Installation Times. The panels and tank don't need to be installed at the same time, ideal for working around construction plans.
  • Ordering Components. Allows you to design the system specifically to your individual situation.
  • No Reinforcement on the Roof Structure as the weight associated with water storage is at ground level.



Sunmaster System Gas or Electric Boost Number of panels
System 1 Gas 175 Litre 1
System 2 Gas 175 Litre 1
System 3 Gas 215 Litre 2
System 4 Gas 215 Litre 2
System 5 Gas 270 Litre 2
System 6 Electric 200 Litre 3.6 kW 2
System 7 Electric 315 Litre 3.6 kW 2
System 8 Electric 315 Litre 3.6 kW 3

Back to top













HOME  |   CONTACT US  |   ABOUT US  |   INSURANCE  |   GAS  |   ELECTRIC  |   SOLAR  |   HEAT PUMP  |   COMMERCIAL  |   COMPONENTS  |   AQUAMAX  |   BOSCH  |   DUX  |   HOCKING  |   RHEEM  |   RINNAI  |   STIEBEL-ELTRON  |   VULCAN  |   ZIP  |   BOOKINGS  |   FAQ  |   REBATES  |   ECOLOGICAL  |   E-MAIL  |   SPECIALS  

Copyright © 2008 Able Hot Water Pty. Ltd.